Difference between revisions of "Floating-point Opcodes"

Revision as of 12:39, 17 August 2016

The FPU offers a lot of operations not available to classic x86 CPU, like SIN, COS, ATAN, SQRT, etc. SIMPLY FPU by Raymond Filiatreault has a compact overview of all FPU commands. Usage and communication with the FPU is a bit uncommon and takes a bit to get used to. It's recommended to read the creation of the snippet we want to modify first, this is how it looks like originally :

cwd             	; "clear" DX for perfect alignment
mov 	al,0x13
X: 		int 0x10	; set video mode AND draw pixel
mov 	ax,cx		; get column in AH
add		ax,di		; offset by framecounter	          <-- REPLACE THIS WITH FPU CODE
xor 	al,ah		; the famous XOR pattern
and 	al,32+8		; a more interesting variation of it
mov 	ah,0x0C		; set subfunction "set pixel" for int 0x10
loop 	X			; loop 65536 times
inc 	di			; increment framecounter
in 		al,0x60		; check keyboard ...
dec 	al			; ... for ESC
jnz 	X			; rinse and repeat
ret					; quit program

and this is how it looks if we replace the instruction with FPU code :

cwd             	; "clear" DX for perfect alignment
mov 	al,0x13
X: 		int 0x10	; set video mode AND draw pixel
mov 	ax,cx		; get column in AH

fninit				; init FPU first
mov		[si],ax		; write first addend to a memory location
fild	word [si]	; F(pu) I(nteger) L(oad)D a WORD from memory location to the FPU stack
mov		[si],di		; write second addend to a memory location
fiadd	word [si]	; Directly add the word in the memory location to the top FPU stack
fist	word [si]	; F(pu) I(nteger) ST(ore) the result into a memory location
mov		ax,[si]		; Get the word from the memory location into AX

xor 	al,ah		; the famous XOR pattern
and 	al,32+8		; a more interesting variation of it
mov 	ah,0x0C		; set subfunction "set pixel" for int 0x10
loop 	X			; loop 65536 times
inc 	di			; increment framecounter
in 		al,0x60		; check keyboard ...
dec 	al			; ... for ESC
jnz 	X			; rinse and repeat
ret					; quit program

The usual interaction with the FPU is as follows

• F(N)INIT : Initialization of the FPU
• store register content in memory location(s)
• transfer from memory location onto FPU stack
• actual calculations on the FPU (more on this soon)
• transfer from FPU stack into memory location(s)
• get register from memory location

That is a lot of extra code for a single integer addition, but once more complex floating point operations are involved, it starts to pay off. For more advanced FPU operation, let's start from scratch with an unoptimized program which plots the distance of each pixel to the screen center as color, in 49 bytes.

push 	0a000h			
pop 	es				; get start of video memory in ES
mov 	al,0x13			; switch to video mode 13h
int 	0x10			; 320 * 200 in 256 colors
fninit					; -	
						; it's useful to comment what's on the
						; stack after each FPU operation
						; to not get lost ;) start is : empty (-)
X:
xor 	dx,dx			; reset the high word before division
mov 	bx,320			; 320 columns
mov 	ax,di			; get screen pointer in AX
div 	bx				; construct X,Y from screen pointer into AX,DX
sub 	ax,100			; subtract the origin
sub 	dx,160			; = (160,100) ... center of 320x200 screen	
mov 	[si],ax			; move X into a memory location
fild 	word [si]		; X
fmul 	st0				; X²
mov 	[si],dx			; move Y into a memory location
fild 	word [si]		; Y X²
fmul 	st0				; Y² X²
fadd 	st0,st1			; Y²+X²
fsqrt					; R
fistp 	word [si]		; -
mov 	ax,[si]			; get the result from memory
stosb					; write to screen (DI) and increment DI
jmp short X				; next pixel

A few words on this :

• The FPU registers (st0, st1, ...) are organized as a stack. When you load something to the FPU, everything else will be moved one location further away from the top (implicitly!) Some FPU instructions work only on the top, other allow the explicit parametrization with arbitrary FPU registers.
• Depending on what you do, sometimes F(N)INIT can be omitted. Real hardware will refuse to work more often than emulators, but it's always worth the try.
• Accessing memory (size) efficiently can be a real pain. The safest way is to reference absolute memory locations (f.e [1234]) but that's two bytes more per instruction than referencing memory with [BX], [SI], [BX+SI], [BP+DI], [BP+SI], [DI] or [BX+DI]. When working with FPU and this classic approach of FPU communication, you have to design your codeflow to have one or some of these locations available.
• Accessing the memory is always with regard to the segment register DS unless you perform segment overrides. When accessing memory with [BP+??] be aware that the memory is accessed with regard to the segment register SS (see here, at 4.6.2.2 The Register Indirect Addressing Modes
• There are a few conventions which help you identify FPU commands. "i" stands for integer (WORD or DWORD), "p" means "pop stack afterwards", so FST means just "store" while FISTP means "store as integer, then pop the stack"

Now let's unleash the state of the art sizecoding arsenal onto this, to bring it down to 37 bytes (40 bytes with aspect correction)

Distant to center optimized

push 	0a000h - 70		; modified to center to 160,100
aas						; aspect ratio constant part
pop 	es				; get start of video memory in ES
mov 	al,0x13			; switch to video mode 13h
int 	0x10			; 320 * 200 in 256 colors
X:
mov 	ax,0xCCCD		; perform the famous...
mul		di				; ... Rrrola trick =)
sub 	dh,[si]			; align vertically
pusha 					; push all registers on stack
fild 	word [bx-8]		; X
fmul 	st0				; X²
fild 	word [bx-9]		; Y X²
fmul	dword [bx+si]	; aspect ratio correction
fmul 	st0				; Y² X²
fadd 	st0,st1			; Y²+X²
fsqrt					; R
fistp 	dword [bx-5]	; -
popa					; pop all registers from stack
stosb					; write to screen (DI) and increment DI
jmp short X				; next pixel

The resulting image is almost identical to to the former. Let's go through this step by step:

• push 0a000h - 70

Instead of aligning horizontally with sub dx,160 we can code this implicitly by moving our segment register ten units - that is 10 * 16 = 160 pixels - to the left (see Real Mode Addressing). With further multiple subtraction of 20 units - that is 320 pixels, we can shift the visible screen towards the top, to finetune vertical alignment. As long as this shift is no more than 4 lines ( 65536 / 320 - 200 = 4,8 ) there is no further visual impact.

• aas

This is the high byte of a constant, placed in a way that [SI] or [BX+SI] resolves to ~1.24 when read as 32bit float. The last byte of segment ES is also of importance. Check yourself with the IEEE 754 Converter

• mov ax,0xCCCD & mul di

Instead of constructing X and Y from the screen pointer DI with DIV you can get a decent estimation with multiplying the screen pointer with 0xCCCD and read X and Y from the 8bit registers DH (+DL as 16bit value) and DL (+AH as 16bit value). The idea is to interpret DI as a kind of 16 bit float in the range [0,1], from start to end. Multiplying this number in [0,1] with 65536 / 320 = 204,8 results in the row before the comma, and again as a kind of a float, the column after the comma. The representation 0xCCCD is the nearest rounding of 204,8 * 256 ( = 52428,8 ~ 52429 = 0xCCCD). As long as the 16 bit representations are used, there is no precision loss.

• sub dh,[si]

The instruction at [SI] is push <word> and has the opcode 0x68 which is 104 in decimal. Combined with the fine tuned vertical alignment above ( ~4 lines) this results in (virtually) subtracting 100 for perfect vertical alignment. This is one byte shorter than sub dh,100.

• pusha / popa

Instead of going the classical way of communicating with the FPU, we push all the registers, read/write values with memory addressing to/from the FPU, then pop all registers again. This works when DS = SS and SP is "close enough" to BX (initially zero and kept that way) to allow [BX+<signed byte>] addressing. It comes with the special benefit of implicit 8bit shifts. One serious drawback is loss of precision, since the registers DL and AH "lose connection" when using PUSHA (see the order of registers : PUSHA/PUSHAD documentation

• fild word [bx+<signed byte>] & *fistp dword [bx+<signed byte>]

This is the so called "stack addressing". We assume that BX=0 and SP=0xFFFE at start, so we know where the registers are in memory after pusha (AX at [BX-4], CX at [BX-6] etc.). It's important to realize that we work with signed 16 bit values now, in the full range of [-32768,32767]. That is also why we need DWORD when storing the result : sqrt(x²+y²) exceeds the signed 16bit range for quite some value pairs. Note that there are already implicit 8bit shifts (bx-9,bx-5)

• fmul dword [bx+si]

With the "Rrrola" trick above, we have the row number to be 204 at maximum, but also the column can't be greater than 256. This results in a wrong aspect ratio, but it can't almost completely be fixed with this two byte instruction (+ one byte for the AAS instruction) : 256 * 1,24 = 317,44 which is quite close to 320. If aspect ratio is of no meaning to the effect, this three bytes can be shaved off.

Now let's add some features:

• extract angle as opposed to the distance and combine both
• reverse divide the distance to create the "tunnel" effect
• animate with smooth steps along the distance
• improve on the colors with subselecting from the standard palette
• quit the program on ESC

This results in the following program with a size of 63 bytes :

tunnel effect neontube

push 	0xa000 - 10 - 3 * 20	; video base - 3.5 lines
or 		al, 0x13				; mode 13h = 320 x 200 in 256 colors
pop 	es						; get aligned video memory base
int 	0x10					; switch videomode
X: 
sub		dh, [si]				; vertical alignment
pusha							; push all registers on stack
fild 	word	[bx-9]			; fpustack :  x
fild 	word	[bx-8]			; fpustack :  y  x
fpatan							; fpustack :  arc
fst 	st1						; fpustack :  arc  arc
fcos							; fpustack :  cos(arc)  arc
fimul	dword	[si]			; fpustack :  l*cos(arc)  arc
fidiv	word	[bx-8]			; fpustack :  l*cos(arc)/x  arc
fiadd	word	[bp+si]			; fpustack :  l*cos(arc)/x+offset  arc
fistp	dword	[bx-7]			; fpustack :  arc
fimul	word	[byte si+val]	; fpustack :  scaled_arc
fistp	word	[bx-5]			; fpustack :  -
popa							; pop all registers from stack
xor 	al, cl					; XOR scaled_arc with distance
and 	al, 16 + 8 + 2			; sub selecting palette part
stosb							; writing to screen
mov 	ax, 0xCCCD				; Performing the famous
mul 	di						; Rrrola trick
jo 		X						; next frame check
add 	word [bp+si], byte 23	; change offset smoothly
in 		al, 0x60				; check for ...
dec 	ax						; ...ESC key
jnz 	X						; otherwise continue
ret								; quit program
val:	dw 6519 				; n = 160 * 256 / pi / 2 ; 0x1977

Many other tiny tunnel effects have been coded, so it is highly recommended to check out the documented source code of "Constant Evolution" by ryg/Farbrausch and the "Heart shaped tunnel" from Lord Kelvin, both with a size of 64 bytes. While "Constant Evolution" takes a slightly different route than the example here (classic FPU communication, classic X Y construction, sqrt(x²+y²) instead of using fcos+fimul), "Heart shaped tunnel" uses no FPU at all. The takeaways from this example are :

• Loading a constant from the code with some degrees of freedom

fimul dword [si] loads a 32 bit integer dividend for the tunnel effect. The highest byte of this constant points to our code, to the opcode from or al, 0x13. This instruction puts 0x13 into al, and since there a lot's of possibilities to achieve this, there is a direct way of changing the appearance of the tunnel with changing this instruction to one of the following mov al,0x13, add al,0x13, xor al,0x13, adc al,0x13, sbb al,0xED, sub al,0xED. In this special case, the instruction can also swapped with pop es to gain a further degree of freedom.

to be continued