Linux
Contents
Introduction
This section of the sizecoding.org wiki is about creating very small (<=256byte) 32-bit X86 based Linux binaries (ELF format). For X86 related information, please check the main pages on this website, as a lot of the same tricks will also work with X86 Linux sizecoding.
A huge thanks goes out to byteobserver (Xorchitecture (2021) - https://www.pouet.net/prod.php?which=88982) as well as some early work by frag/fsqrt (Lintro (2012) - https://www.pouet.net/prod.php?which=58560) for all their research and hard work in producing tiny ELF binaries for linux.
Alternative methods and expectations
As the development of actual tiny ELF assembler executables on linux is still in its early days, with about a handful of actual <256 byte tiny ELF binary productions, lets look at some of the other methods of getting tiny intros onto linux.
1) Self-compilation tricks (using gcc or python): The executable executes a gcc (or python) compilation of the embedded code and executes it. This requires GCC and/or specific version of Python and potentially dynamically linked libraries to be installed.
2) Linking a piece of compiled C code to a stripped ELF header + dev/fb0 setup: This method has been used by The Orz to create several sizecoded procedural graphics entries. For more information about this check out https://github.com/grz0zrg/tinycelfgraphics
So what can we realistically expect from a 256 intro on Linux?
Expect about ~100 byte cost for the ELF header, setting up fb0 , some form of update loop, framecounter and using either mmap setup or copying via pwrite64 to get you started. If you want audio as well, the avaialble byte-budget will shrink even more.
Additionally, since we're dealing with 32-bit code, expect some instructions (especially when dealing with direct values) to take up bit more space.
Lets hope this wiki page will inspire and help people to get started and create newer, better Linux tiny intros ;-)
Setting up
Setting up your development platform for Linux development:
- Suggested Distributions : Any X86-based Linux distribution that allows for execution of 32-bit executables.
- Assembler: NASM (or any other linux compatible 32-bit X86 assembler)
Furthermore, it is important that the user has access to the dev/fbo framebuffer. This can be achieved by launching a virtual (fullscreen) console using CTRL-F3/F4 in most distributions, login and making sure the user has access to the video group. If this is not the case for some reason, you can add your user to the videogroup like so:
sudo usermod -a -G video usernameNote: Make sure your binary is executable for everyone using the chmod 777 command after compilation :D
System Calls
Interaction with the Linux OS is mostly done via int 0x80 system calls. This usually includes dealing with opening files/framebuffer/audio and handling timers.
A full list of system calls and their expected register arguments is available at: https://syscalls32.paolostivanin.com/
ELF Header Information
Like a 32-bit windows executable, a 32-bit binary for linux comes with a pretty hefty ELF header.
org 0x00010000
ehdr: ; Elf32_Ehdr
db 0x7F, "ELF", 1, 1, 1, 0 ; e_ident
times 8 db 0
dw 2 ; e_type
dw 3 ; e_machine
dd 1 ; e_version
dd _start ; e_entry
dd phdr - $$ ; e_phoff
dd 0 ; e_shoff
dd 0 ; e_flags
dw ehdrsize ; e_ehsize
dw phdrsize ; e_phentsize
dw 1 ; e_phnum
dw 0 ; e_shentsize
dw 0 ; e_shnum
dw 0 ; e_shstrndx
phdr: ; Elf32_Phdr
dd 1 ; p_type
dd 0 ; p_offset
dd $$ ; p_vaddr
dd $$ ; p_paddr
dd filesize ; p_filesz
dd filesize ; p_memsz
dd 5 ; p_flags
dd 0x1000 ; p_align
_start:
; your program here
Luckily some parts of the ELF header can be repurposed and used to store some data and code. There is quite an extensive journey about some header optimisations available at http://www.muppetlabs.com/~breadbox/software/tiny/teensy.html for those that are interested.
After merging the ehdr and phdr parts and changing your entry point, we can get the header down to about the 48 bytes range with a nifty /dev/fb0 string inserted which we'll be able to use later for setting up the framebuffer.
org $00010000
db $7F,"ELF" ; e_ident
dd 1 ; p_type
dd 0 ; p_offset
dd $$ ; p_vaddr
dw 2 ; e_type, p_paddr
dw 3 ; e_machine
dd entry ; e_version, p_filesz
dd entry ; e_entry, p_memsz
dd 4 ; e_phoff, p_flags
fname:
db "/dev/fb0",0 ; e_shoff, p_align, e_flags, e_ehsize
entry:
; this next instruction overlaps with a critical part of the elf header
; it needs to look like XX YY YY YY YY where YYYYYYYY=fname
; so you can change the register to something else or use push
; but the four byte pointer to fname cannot be changed.
mov ebx,fname ; e_phentsize, e_phnum
; e_shentsize, e_shnum, e_shstrndx are below but we can put whatever code/bytes we want there
mov cl,1 ; set read/write mode (1 or inc ecx is sufficient for pcopy method, read/write (2) is needed for mmap)
mov al,5 ; 5 = open syscall
int 0x80 ; open /dev/fb0 = 3
Displaying Graphics
Graphics can be produced by using and accessing the linux /dev/fb0 framebuffer. First the framebuffer has to be opened at the intro initialisation, and can then be used to either copy a piece of memory over using the pwrite64 syscall (0xb5) or using map a piece of memory directly to the framebuffer using syscall mmap.
Setting up the framebuffer
The dev/fb0 framebuffer can best be accessed from a virtual console (ctrl-f3/f4 in most distributions).
To make sure your dev/fb0 framebuffer is set up properly, you can apt get the fbset tool and display and/or alter the framebuffer resolution as most intros will make an assumption about the resolution of your framebuffer.
To test access to dev/fb0 framebuffer, you can use the following cat command:
cat /dev/urandom > /dev/fb0which should produce random noise to the screen (ignorning the out of memory error that is expected from cat)
Alternatively, if you don't like to use the virtual console during the development of your intro, or the framebuffer setup is somehow giving you problems, there is a smalle fbe.c / fbe binary supplied with the xorchitecture intro by byteobserver that has a SDL windows mmap'ed to tmp/fb0 which you can launch alongside your intro (don't forget to redirect the dev/fb0 pointer in your intro to tmp/fb0).
Getting something on screen
First we need to fill up our local memorybuffer with pixeldata, so lets start doing that using the old AND pattern
mov ecx,width*height
setpixels:
mov ebx,width
mov eax,ecx
cdq
div ebx ; edx = x-coord , eax=y coord
and eax,edx ; xor pattern
mov [esp+ecx*4+0],al ; b
mov [esp+ecx*4+1],al ; g
mov [esp+ecx*4+2],al ; r
loop setpixels
Once your buffer (in this case marked by the esp stackpointer) is all filled up with pixeldata, you can copy it to the /dev/fb0 using the pwrite64 syscall like so:
; copy memorybuffer to screen (/dev/fb0) using the pwrite64 syscall
mov ecx,esp ; buffer ptr
mov edx,ebp ; screen size
xor esi,esi ; seek to beginning of screen
xor edi,edi
mov ebx,3 ; fd of framebuffer
mov eax,0xb5 ; pwrite64
int 0x80 ; pwrite64 to framebuffer
As an alternative to using pwrite64 you can also mmap )check out intros by The Orz for an example with mmap) to map a piece of memory to dev/fb0. However using mmap because you can get tearing, and you can't realistically do feedback effects without implementing a second buffer, as reading from the mmaped memory is VERY slow.
;mmap(NULL, buflen, PROT_WRITE, MAP_SHARED, fd, 0);
push edx ;edx = 0
push eax ;fd
push byte 1 ;MAP_SHARED
mov al, 90
push eax ;we need to set second bit for PROT_WRITE, 90 = 01011010 and setting PROT_WRITE automatically set PROT_READ
push width*height*4 ;buffer size
push edx ;NULL
mov ebx, esp ;args pointer
int 80h ;eax <- buffer pointer
Example Framework
Munching squares
So when we put all the above together, we can get a minimal kind of framework running that will look something like this munching square example provided to us by byteobserver:
; byte.observer's munching square linux example
; assembles with nasm -fbin munch.asm -o munch
width equ 1024
height equ 768
bits 32
org $00010000
db $7F,"ELF" ; e_ident
dd 1 ; p_type
dd 0 ; p_offset
dd $$ ; p_vaddr
dw 2 ; e_type, p_paddr
dw 3 ; e_machine
dd entry ; e_version, p_filesz
dd entry ; e_entry, p_memsz
dd 4 ; e_phoff, p_flags
fname:
db "/dev/fb0",0 ; e_shoff, p_align, e_flags, e_ehsize
entry:
mov ebx,fname ; e_phentsize, e_phnum
inc ecx ; = 1 = O_WRONLY
mov al,5 ; 5 = open syscall
int 0x80 ; open /dev/fb0 = 3
mov ebp,width*height*4 ; ebp = screen size
sub esp,ebp ; make room on the stack for the video memory
mainloop:
mov ecx,ebp ; init pixel index
shr ecx,2 ; divide by bits per pixel
inc edi ; frame counter
setpixels:
mov ebx,width
mov eax,ecx
cdq
div ebx ; edx = x-coord , eax=y coord
xor eax,edx ; xor pattern
add eax,edi ; make it munch
mov [esp+ecx*4+0],al ; b
mov [esp+ecx*4+1],al ; g
mov [esp+ecx*4+2],al ; r
mov [esp+ecx*4+3],al ; a
loop setpixels
; dump the whole thing to the screen using pwrite64 syscall
mov ecx,esp ; buffer ptr
mov edx,ebp ; screen size
push edi ; save frame counter
xor esi,esi ; seek to beginning of screen
xor edi,edi
mov ebx,3 ; fd of framebuffer
mov eax,0xb5 ; pwrite64
int 0x80 ; pwrite64 to framebuffer
pop edi
jmp mainloop
Adding Sound
It is possible to output digital audio by binding the aplay command into your intro. aplay is available on almost all Linux setups. You can test it by running the following, which should produce some white noise:
$ aplay /dev/urandom
To use aplay in the context of an intro, there is a bit of setup work involved. One method uses 4 syscalls to start aplay as a child process, so that audio data can then be simply written to the appropriate file descriptor to send it to the speakers.
Method 1: pipe,fork,dup2,execve
This approach is as follows. First, we create a pipe using the pipe syscall (0x2a). This syscall takes a pointer to an array of 2 ints, which it fills with the file descriptors of the two ends of the pipe. In the following, we simply overwrite the top of the stack with the file descriptors.
mov ebx,esp xor eax,eax mov al,0x2a ; pipe int 0x80
Next, we fork the process (syscall 0x2). The child process will be used to exec aplay. If you do this right after creating the pipe, you don't need to zero eax before setting it to 2.
mov al,2 ; fork int 0x80 ; returns eax=0 in child process and eax=1 in parent process dec eax js child
Additional Resources
- Pouet: 256byte productions on Linux
- Pouet: 128byte productions on Linux
- A dev/fb0 framebuffer binding + ELF header for small C programs
- A Whirlwind Tutorial on Creating Really Teensy ELF Executables for Linux
Larger productions (1k and 4k intros)
Creating 1k and 4k intros on linux usually requires a different setup, for more information on this check out the following links:
