6809
Contents
Introduction
Wanting to start sizecoding on a 6809 platform in this day and age can be tough. So here is a bit of help to get you started:
6809 Based Plaforms
- Dragon 32/64 - Dragon Sizecoding information
- Vectrex - Vectrex Sizecoding information
The 6809 CPU
Registers
These are the internal registers of the 6809:
- A + B (D): Two 8-bit accumulators which can be combined into one 16-bit accumulator.
- X + Y: Two 16-bit index registers.
- S + U: Two 16-bit stack pointers, which can also be used as index registers.
- PC: 16-bit Program Counter
- DP: 8-bit Direct Page value, a pointer to a page in RAM to set the Direct Page (Moveable Zero Page)
- CC: 8-bit Condition Codes
Instruction Set
The 6502's instruction set was inspired by the 6800 series (Predecessor to the 6809), so there are a few similarities between the two. If you are coming from a 6502 background, you may get the jist of it sooner than others.
Here is a handy sheet with all the instructions of the 6809: https://www.chibiakumas.com/6809/CheatSheet.pdf
Techniques
Stack Blasting
The 6809 has quick methods of pushing and pulling registers onto and off the stack, which only take 5 cycles plus one per byte you are pushing/pulling. This can be used for fast memory copying.
Although the 6809 does have auto-incrementing it can take up to 16 cycles per two bytes to copy. With stack blasting we can speed it up to 7 bytes in 24 cycles.
Due to using almost every register you will have to back up certain registers before utilising this method.
;The conventional method:
LDX #SOURCE
LDY #DESTINATION
LDD ,X++
STD ,Y++
;Stack blasting:
LDS #SOURCE
LDU #DESTINATION
PULS D,X,Y,DP
PSHU D,X,Y,DP
