Getting Started
From SizeCoding
You're going to be learning assembler.
Contents
Know your environment
"default environment settings"
.COM file defaults
1-byte opcodes
The 80x86 family was originally a CISC design, which is a design philosophy that intentionally attempts to create many instructions that perform multiple steps. In sizecoding, you are trying to perform as much work in as little space as possible, so it is helpful to know (or memorize!) every 1-byte instruction in the 80x86 family. Here's a handy chart (segments and prefixes omitted):
| Opcode | Mnemonic | Arch | Description | Notes |
|---|---|---|---|---|
| 37 | AAA | ASCII adjust AL (carry into AH) after addition | ||
| 3F | AAS | ASCII adjust AL (borrow from AH) after subtraction | ||
| 98 | CBW | Convert byte into word (AH = top bit of AL) | ||
| 99 | CDQ | 80386+ | Convert dword to qword (EDX = top bit of EAX) | |
| F8 | CLC | Clear carry flag | ||
| FC | CLD | Clear direction flag so SI and DI will increment | ||
| FA | CLI | Clear interrupt enable flag; interrupts disabled | ||
| F5 | CMC | Complement carry flag | ||
| A6 | CMPS mb,mb | Compare bytes [SI] - ES:[DI], advance SI,DI | ||
| A7 | CMPS mv,mv | Compare vwords [SI] - ES:[DI], advance SI,DI | ||
| A6 | CMPSB | Compare bytes DS:[SI] - ES:[DI], advance SI,DI | ||
| A7 | CMPSD | 80386+ | Compare dwords DS:[SI] - ES:[DI], advance SI,DI | |
| A7 | CMPSW | Compare words DS:[SI] - ES:[DI], advance SI,DI | ||
| 99 | CWD | Convert word to doubleword (DX = top bit of AX) | ||
| 98 | CWDE | 80386+ | Sign-extend word AX to doubleword EAX | |
| 27 | DAA | Decimal adjust AL after addition | ||
| 2F | DAS | Decimal adjust AL after subtraction | ||
| F4 | HLT | Halt | Resumes operation if an interrupt occurs; could use this for pacing effects that run too fast | |
| EC | IN AL,DX | Input byte from port DX into AL | ||
| ED | IN eAX,DX | Input vword from port DX into eAX | ||
| 6C | INS rmb,DX | 80186+ | Input byte from port DX into [DI], advance DI | |
| 6D | INS rmv,DX | 80186+ | Input vword from port DX into [DI], advance DI | |
| 6C | INSB | 80186+ | Input byte from port DX into ES:[DI], advance DI | |
| 6D | INSD | 80386+ | Input dword from port DX into ES:[DI], advance DI | |
| 6D | INSW | 80186+ | Input vword from port DX into ES:[DI], advance DI | |
| CC | INT 3 | Interrupt 3 (trap to debugger) | ||
| CE | INTO | Interrupt 4 if overflow flag is 1 | ||
| CF | IRET | Interrupt return (far return and pop flags) | ||
| CF | IRETD | 80386+ | Interrupt return (pop EIP, ECS, Eflags) | |
| 9F | LAHF | Load: AH = flags SF ZF xx AF xx PF xx CF | ||
| C9 | LEAVE | 80186+ | Set SP to BP, then POP BP (reverses previous ENTER) | |
| AC | LODS mb | Load byte [SI] into AL, advance SI | ||
| AD | LODS mv | Load vword [SI] into eAX, advance SI | ||
| AC | LODSB | Load byte [SI] into AL, advance SI | ||
| AD | LODSD | 80386+ | Load dword [SI] into EAX, advance SI | |
| AD | LODSW | Load word [SI] into AX, advance SI | ||
| A4 | MOVS mb,mb | Move byte [SI] to ES:[DI], advance SI,DI | ||
| A5 | MOVS mv,mv | Move vword [SI] to ES:[DI], advance SI,DI | ||
| A4 | MOVSB | Move byte DS:[SI] to ES:[DI], advance SI,DI | ||
| A5 | MOVSD | 80386+ | Move dword DS:[SI] to ES:[DI], advance SI,DI | |
| A5 | MOVSW | Move word DS:[SI] to ES:[DI], advance SI,DI | ||
| 90 | NOP | No Operation | ||
| EE | OUT DX,AL | Output byte AL to port number DX | ||
| EF | OUT DX,eAX | Output word eAX to port number DX | ||
| 6E | OUTS DX,rmb | 80186+ | Output byte [SI] to port number DX, advance SI | |
| 6F | OUTS DX,rmv | 80186+ | Output word [SI] to port number DX, advance SI | |
| 6E | OUTSB | 80186+ | Output byte DS:[SI] to port number DX, advance SI | |
| 6F | OUTSD | 80386+ | Output dword DS:[SI] to port number DX, advance SI | |
| 6F | OUTSW | 80186+ | Output word DS:[SI] to port number DX, advance SI | |
| 1F | POP DS | Set DS to top of stack, increment SP by 2 | ||
| 07 | POP ES | Set ES to top of stack, increment SP by 2 | ||
| 17 | POP SS | Set SS to top of stack, increment SP by 2 | ||
| 61 | POPA | 80186+ | Pop DI,SI,BP,x ,BX,DX,CX,AX (SP value is ignored) | |
| 61 | POPAD | 80386+ | Pop EDI,ESI,EBP,x,EBX,EDX,ECX,EAX (ESP ign.) | |
| 9D | POPF | Set flags register to top of stack, increment SP by 2 | ||
| 9D | POPFD | 80386+ | Set eflags reg to top of stack, incr SP by 2 | |
| 0E | PUSH CS | Set [SP-2] to CS, then decrement SP by 2 | ||
| 1E | PUSH DS | Set [SP-2] to DS, then decrement SP by 2 | ||
| 06 | PUSH ES | Set [SP-2] to ES, then decrement SP by 2 | ||
| 16 | PUSH SS | Set [SP-2] to SS, then decrement SP by 2 | ||
| 60 | PUSHA | 80186+ | Push AX,CX,DX,BX,original SP,BP,SI,DI | |
| 60 | PUSHAD | 80386+ | Push EAX,ECX,EDX,EBX,original ESP,EBP,ESI,EDI | |
| 9C | PUSHF | Set [SP-2] to flags register, then decrement SP by 2 | ||
| 9C | PUSHFD | 80386+ | Set [SP-4] to eflags reg, then decr SP by 4 | |
| C3 | RET | Return to caller (near or far, depending on PROC) | ||
| CB | RETF | Return to far caller (pop offset, then seg) | ||
| C3 | RETN | Return to near caller (pop offset only) | ||
| 9E | SAHF | Store AH into flags SF ZF xx AF xx PF xx CF | ||
| AE | SCAS mb | Compare bytes AL - ES:[DI], advance DI | ||
| AF | SCAS mv | Compare vwords eAX - ES:[DI], advance DI | ||
| AE | SCASB | Compare bytes AL - ES:[DI], advance DI | ||
| AF | SCASD | 80386+ | Compare dwords EAX - ES:[DI], advance DI | |
| AF | SCASW | Compare words AX - ES:[DI], advance DI | ||
| 36 | SS | Use SS segment for the following memory reference | ||
| F9 | STC | Set carry flag | ||
| FD | STD | Set direction flag so SI and DI will decrement | ||
| FB | STI | Set interrupt enable flag, interrupts enabled | ||
| AA | STOS mb | Store AL to byte [DI], advance DI | ||
| AB | STOS mv | Store eAX to word [DI], advance DI | ||
| AA | STOSB | Store AL to byte ES:[DI], advance DI | ||
| AB | STOSD | 80386+ | Store EAX to dword ES:[DI], advance DI | |
| AB | STOSW | Store AX to word ES:[DI], advance DI | ||
| 9B | WAIT | Wait until floating-point operation is completed | ||
| D7 | XLAT | Set AL to memory byte DS:[BX + unsigned AL] |
